工業用反滲透純水系統

RT系列反滲透系統

產品概述
RT系列反滲透系統是專為治療低度到中度TDS feedwaters中遇到的市政供水，大壩和河流水域，孔和苦鹹水.這些基本的系統被設計成簡單的治療安裝，操作和幾乎不需要維護.，膜沖洗設施的標準和操作在每次系統啟動，以協助保持膜的清潔.持續監測給水壓力，滾裝滲透質量和儲水槽水位被執行的集成微處理器基於控制器. rotek的反向反滲透系統能夠去除的鹽，以及其它雜質，如細菌，糖，蛋白質，染料和成分，其分子量大於150 - 250道爾頓。

產品功能
** high pressure stainless steel membrane housing
* low energy tfc spiral membrane
* high pressure schedule 80 pipe work
*抗-corrosion multistage pump
* microprocessor controller with tds readout
* automatic flush with raw water
* low feedwater pressure sensor
* storage tank level sensor input
* permeate and reject flow rotameters
* adjustable pressure regulator valve
* liquid filled pressure gauges (filter feed, ro feed)
* concentrate recycling valve
* electro-polished stainless steel frame
* powder coated control panel with power supply provisions for pre-過濾袋是簡單而快速的以被替換，並且比常規濾芯成本較低。

規範

specifications models		rt 1500	rt 3000	rt 4500	rt 6000	rt 7500	rt 9000
permeate flow	gpd / lph	1500 / 250	3000 / 500	4500 / 750	6000 / 1000	7500 / 1250	9000 / 1500
module qty & mf40e		(1), 4"x40"	(2), 4"x40"	(3), 4"x40"	(4), 4"x40"	(5), 4"x40"	(6), 4"x40"
nominal recovery		50%
電機(通用120)		0.75	2.25	2.25	2.25	3	3
重量(公斤)		43	43	43	43	43	43
尺寸(入口點和出口點直徑)		530 × 530 × 1150

feed water requirments
生活超過1年: 3.0: 10.0
tds: <所需的進水壓力(choose bw systems when exceed)
turbidity: < 1.0 ntu (required pre-treatment when exceed)
sdi: < 5.0 (required pre-treatment when exceed)
hardness: <所需的進水壓力(required pre-treatment when exceed)
residual chlorine: < 0.1寬的pH範圍(required pre-treatment when exceed)

feed water quality, pressures and flow rates have a significant impact on the performance of any reverse osmosis system. to ensure reliable and consistent long-term performance, it is important to supply feed water having the minimum specifications detailed below. if your feed water supply is marginal, you should consider using a feed water break tank and booster pump to supply the system.